Skip to main content
SNIJER

Services

Manufacturing Services

Machining, fabrication, casting, moulding and additive manufacturing under one roof of engineering knowledge.

CNC Machining

CNC machining removes material from a solid block under computer control to make precise metal and plastic parts. Snijer offers milling, turning, drilling, 5-axis and Swiss-type machining, grinding and EDM, from prototype to series.

Specialisations

CNC Milling

CNC milling uses rotating multi-tooth cutters to shape flat surfaces, pockets, slots and contours in metal or plastic.

CNC Turning

CNC turning rotates a workpiece against a fixed cutting tool to produce cylindrical parts such as shafts, bushes, flanges and…

CNC Drilling

CNC drilling produces accurately positioned round holes, from small cross-holes to deep-hole bores, with controlled depth…

5-Axis Machining

5-axis machining moves the cutting tool along five axes at once, so complex shapes, undercuts and features on several faces are…

Swiss Machining

Swiss machining feeds bar stock through a guide bush so the cut is made right at the support point.

Precision Grinding

Precision grinding uses an abrasive wheel to bring hardened parts to final size and surface finish, reaching tolerances and…

Wire EDM Machining

Wire EDM cuts electrically conductive material with a thin, electrically charged wire.

Sinker EDM

Sinker EDM erodes a negative of a shaped electrode into a conductive workpiece.

Sheet Metal Fabrication

Sheet metal fabrication turns flat metal sheet into finished parts by cutting, bending, stamping and joining. Snijer offers laser cutting, water jet cutting, bending and stamping for enclosures, brackets and structural parts.

Specialisations

Laser Cutting

Laser cutting melts or vaporises sheet metal along a programmed path with a focused beam, giving fast, accurate cuts with fine…

Water Jet Cutting

Water jet cutting uses a high-pressure stream of water, usually mixed with abrasive, to cut almost any material without heat.

Metal Bending

Metal bending folds flat sheet along straight lines with a press brake to form angles, channels and boxes.

Metal Stamping

Metal stamping presses sheet or strip between a punch and a die to blank, pierce and form parts in seconds.

Vacuum Casting

Vacuum casting makes small series of high-quality plastic or rubber-like parts in silicone moulds taken from a master model. It is the fast, low-cost route between a 3D-printed prototype and injection moulding.

3D Printing

3D printing, or additive manufacturing, builds parts layer by layer directly from a 3D model. Snijer offers FDM, SLA, DLP, SLS, SLM, DMLS, Carbon DLS, HP MJF ve PolyJet for prototypes, jigs and fixtures, and low-volume production parts.

Specialisations

FDM 3D Printing

FDM (fused deposition modelling) extrudes heated thermoplastic through a nozzle layer by layer.

SLA 3D Printing

SLA (stereolithography) cures liquid photopolymer resin with a UV laser, layer by layer.

DLP 3D Printing

DLP (digital light processing) cures an entire resin layer at once with a projector.

SLS 3D Printing

SLS (selective laser sintering) fuses nylon powder with a laser.

SLM 3D Printing

SLM (selective laser melting) fully melts metal powder with a laser to build dense metal parts.

DMLS 3D Printing

DMLS (direct metal laser sintering) builds dense metal parts from alloy powder with a laser.

Injection Molding

Injection moulding melts plastic granules and injects them into a steel mould, producing identical plastic parts in seconds. It is the standard process for high-volume plastic parts once tooling is made.

Specialisations

Overmolding

Overmoulding moulds a second material, usually a soft TPE or rubber, over a rigid plastic base part.

Insert Molding

Insert moulding places a pre-made part — typically a metal thread, pin, contact or bushing — in the mould and moulds plastic…

Die Casting Services

Die casting injects molten aluminium, zinc or magnesium into a hardened steel die at high pressure. It makes strong, thin-walled, near-net-shape metal parts at high volume and low unit cost.

Aluminum Extrusion Services

Aluminium extrusion pushes heated aluminium through a shaped die to create long profiles with a constant cross-section. Cut, machined and finished, profiles become frames, heat sinks, rails and enclosures.

Carbon Fiber Molding Solutions

Carbon fibre moulding lays carbon fabric or prepreg into a mould and cures it into a composite part. The result is stiff, strong and very light: typically around a fifth of the weight of steel at comparable stiffness.

Custom Blade & Knife Manufacturing

Custom industrial blades and knives, engineered for peak performance and durability, are made by our sister brand Snijer Blades: circular, straight, perforation, toothed and granulator blades to your drawing.

Additional Services

Beyond making parts, Snijer supports the whole project: prototyping and new product introduction, series production, surface finishing, and technical consulting and ongoing support.

Specialisations

Surface Finishing

Surface finishing improves how a part looks, wears and resists corrosion.

Technical Consulting & Support

Technical consulting and ongoing support help your parts and tools perform for their whole lifecycle: application analysis…

Have a drawing ready?

Send us your specification and our engineers will come back with a manufacturing proposal, a price and a lead time.

Request a quote