Skip to main content
SNIJER

Part of 3D Printing

SLM 3D Printing⁠

SLM (selective laser melting) fully melts metal powder with a laser to build dense metal parts. It makes lightweight, complex components in aluminium, titanium and stainless steel.

About this service

Metal powder bed fusion allows internal cooling channels, lattice structures and consolidated assemblies that cannot be machined. Parts are built on a plate with supports, then heat-treated, removed and — where fits or sealing faces demand — machined to final tolerance.

Materials include AlSi10Mg, 316L stainless steel and titanium Ti-6Al-4V (grade 5).

Key capabilities

  • Dense, high-strength metal parts
  • Internal channels and lattice structures
  • Part consolidation
  • Post-machining of critical faces

Typical applications

  • Lightweight aerospace brackets
  • Conformal-cooled tooling inserts
  • Custom medical implants and instruments

Materials

  • AlSi10Mg
  • Stainless steel 316L
  • Ti-6Al-4V (grade 5)
  • Ti grade 4
  • Aluminum 6061

Frequently asked questions

Do metal 3D-printed parts need machining?

Usually on critical faces. The printed surface is rough and tolerances are wider than machined ones, so sealing faces, bores and threads are finished by machining.

Related services

FDM 3D Printing

FDM (fused deposition modelling) extrudes heated thermoplastic through a nozzle layer by layer.

SLA 3D Printing

SLA (stereolithography) cures liquid photopolymer resin with a UV laser, layer by layer.

DLP 3D Printing

DLP (digital light processing) cures an entire resin layer at once with a projector.

SLS 3D Printing

SLS (selective laser sintering) fuses nylon powder with a laser.