CNC Milling
CNC milling uses rotating multi-tooth cutters to shape flat surfaces, pockets, slots and contours in metal or plastic.
Services
CNC machining removes material from a solid block under computer control to make precise metal and plastic parts. Snijer offers milling, turning, drilling, 5-axis and Swiss-type machining, grinding and EDM, from prototype to series.
Our CNC machining service covers the whole route from drawing to finished part: milling, turning, drilling, grinding and electrical discharge machining (EDM) on 3-, 4- and 5-axis equipment. We work in stainless steel, tool steel, aluminium, brass, titanium, engineering plastics and composites, and hold tolerances in the micron range where the geometry allows.
Combining processes is where machining pays off. Turning and milling form the part, grinding and EDM bring critical features to final size, and the result needs little secondary finishing. We review every drawing for manufacturability before cutting and tell you early if a feature will drive cost or risk.
Choose the process that fits your part.
CNC milling uses rotating multi-tooth cutters to shape flat surfaces, pockets, slots and contours in metal or plastic.
CNC turning rotates a workpiece against a fixed cutting tool to produce cylindrical parts such as shafts, bushes, flanges and…
CNC drilling produces accurately positioned round holes, from small cross-holes to deep-hole bores, with controlled depth…
5-axis machining moves the cutting tool along five axes at once, so complex shapes, undercuts and features on several faces are…
Swiss machining feeds bar stock through a guide bush so the cut is made right at the support point.
Precision grinding uses an abrasive wheel to bring hardened parts to final size and surface finish, reaching tolerances and…
Wire EDM cuts electrically conductive material with a thin, electrically charged wire.
Sinker EDM erodes a negative of a shaped electrode into a conductive workpiece.
CNC (computer numerical control) machining is a subtractive process: cutting tools, guided by a digital program, remove material from a solid block to create a part to your drawing. It is used for metals and plastics and suits single prototypes as well as repeat series.
Standard milling and turning typically hold ±0.05 mm. Tolerances of ±0.01 mm or tighter are achievable on critical features, often with grinding or EDM. The achievable value depends on material, geometry and size, so mark your critical dimensions when you request a quote.
A dimensioned 2D drawing (PDF or DXF) with material, quantity and critical tolerances is the minimum. A STEP model alongside it speeds up programming and our manufacturability review.
Sheet metal fabrication turns flat metal sheet into finished parts by cutting, bending, stamping and joining.
Vacuum casting makes small series of high-quality plastic or rubber-like parts in silicone moulds taken from a master model.
3D printing, or additive manufacturing, builds parts layer by layer directly from a 3D model.
Injection moulding melts plastic granules and injects them into a steel mould, producing identical plastic parts in seconds.