CNC Machining
CNC machining removes material from a solid block under computer control to make precise metal and plastic parts.
Services
Carbon fibre moulding lays carbon fabric or prepreg into a mould and cures it into a composite part. The result is stiff, strong and very light: typically around a fifth of the weight of steel at comparable stiffness.
We produce carbon fibre parts by the method that fits the volume and quality target: wet lay-up and vacuum bagging for prototypes and one-offs, prepreg with oven or autoclave cure for the highest fibre content and performance, and resin transfer or compression moulding for repeatable series.
Moulds are machined from tooling board, aluminium or steel, and cured parts are trimmed, drilled and finished by CNC and water jet cutting. Carbon fibre parts are used where weight and stiffness matter most — robotics, motorsport, drones, medical equipment and machine tooling.
Carbon fibre moulding shapes carbon fibre reinforcement and resin in a mould and cures it into a rigid composite part. The fibres carry the load; the resin holds them in place.
When weight and stiffness drive performance — moving parts, robotics, vehicles, portable equipment — yes. For static, heavy-duty parts, aluminium or steel is usually more economical.
CNC machining removes material from a solid block under computer control to make precise metal and plastic parts.
Sheet metal fabrication turns flat metal sheet into finished parts by cutting, bending, stamping and joining.
Vacuum casting makes small series of high-quality plastic or rubber-like parts in silicone moulds taken from a master model.
3D printing, or additive manufacturing, builds parts layer by layer directly from a 3D model.