Overmolding
Overmoulding moulds a second material, usually a soft TPE or rubber, over a rigid plastic base part.
Services
Injection moulding melts plastic granules and injects them into a steel mould, producing identical plastic parts in seconds. It is the standard process for high-volume plastic parts once tooling is made.
The mould is the investment: a precisely machined and often EDM-finished steel tool whose cost is spread across the production run. Per-part cost then falls sharply with volume, which is why injection moulding takes over from vacuum casting and 3D printing once quantities reach the thousands.
We help with design for moulding — wall thickness, draft, ribs, gates and shrinkage — before the tool is cut, and offer overmoulding and insert moulding for multi-material and metal-reinforced parts. Prototype tooling in aluminium is an option for validation runs.
Choose the process that fits your part.
Overmoulding moulds a second material, usually a soft TPE or rubber, over a rigid plastic base part.
Insert moulding places a pre-made part — typically a metal thread, pin, contact or bushing — in the mould and moulds plastic…
Injection moulding melts plastic granules and forces them under pressure into a closed steel mould. The plastic cools and solidifies into the shape of the cavity, and the part is ejected. The cycle repeats in seconds.
Typically from around a thousand parts, depending on size and complexity. Below that, vacuum casting or 3D printing is usually cheaper; we quote both so you can compare.
CNC machining removes material from a solid block under computer control to make precise metal and plastic parts.
Sheet metal fabrication turns flat metal sheet into finished parts by cutting, bending, stamping and joining.
Vacuum casting makes small series of high-quality plastic or rubber-like parts in silicone moulds taken from a master model.
3D printing, or additive manufacturing, builds parts layer by layer directly from a 3D model.