Skip to main content
SNIJER
CNC Drilling

Part of CNC Machining

CNC Drilling⁠

CNC drilling produces accurately positioned round holes, from small cross-holes to deep-hole bores, with controlled depth, diameter and surface finish.

About this service

Drilling is combined with reaming, boring and tapping to bring holes to the required fit. Hole position is held by the machine's positioning accuracy rather than by hand layout, so hole patterns repeat from part to part.

For deep and small-diameter holes we choose tools and coolant delivery that clear chips reliably, which protects both straightness and surface quality.

Key capabilities

  • Drilling, reaming, boring and tapping
  • Repeatable hole patterns
  • Deep and small-diameter holes
  • Countersinks and counterbores

Typical applications

  • Manifolds and valve bodies
  • Flanges and mounting plates
  • Fixture plates with hole grids

Materials

  • Aluminium Alloys: 6061-T6, 7075, 2024, 6082, 5083
  • Stainless Steels: 304, 316L, 303, 17-4 PH, 420
  • Carbon & Alloy Steels: AISI 1018, 1045, 4140, 4340, St52
  • Tool Steels: D2 (1.2379), A2, O1, H13
  • Titanium Alloys: Grade 2, Grade 5 (Ti-6Al-4V)
  • Copper, Brass & Bronze: C360 Brass, Pure Copper (C101/C110), Phosphor Bronze
  • Cast Irons: Ductile Iron, Gray Iron
  • Engineering Plastics: PEEK, POM (Delrin/Acetal), PTFE (Teflon), Nylon (PA6/PA66), UHMW-PE
  • Superalloys: Inconel 718, Inconel 625, Hastelloy C-276

Frequently asked questions

How accurate can drilled holes be?

Drilled holes typically reach about IT11–IT12. Reaming or fine boring brings them to H7 or better. Position accuracy depends on the set-up and is set against your datum scheme.

Related services

CNC Milling

CNC milling uses rotating multi-tooth cutters to shape flat surfaces, pockets, slots and contours in metal or plastic.

CNC Turning

CNC turning rotates a workpiece against a fixed cutting tool to produce cylindrical parts such as shafts, bushes, flanges and…

5-Axis Machining

5-axis machining moves the cutting tool along five axes at once, so complex shapes, undercuts and features on several faces are…

Swiss Machining

Swiss machining feeds bar stock through a guide bush so the cut is made right at the support point.