Skip to main content
SNIJER

Part of 3D Printing

DMLS 3D Printing⁠

DMLS (direct metal laser sintering) builds dense metal parts from alloy powder with a laser. It is used for functional prototypes and end-use parts in tool steel, stainless steel, titanium and nickel alloys.

About this service

DMLS and SLM are close relatives: both fuse metal powder layer by layer. We treat them as one family and select the machine and alloy to match your part, load case and finish requirements. Stress-relief heat treatment and support removal are part of the job, and machining is planned where precise fits are needed.

Key capabilities

  • Tool steel, stainless steel, titanium and nickel alloys
  • Functional prototypes and end-use parts
  • Stress-relief heat treatment included
  • Machining where fits demand

Typical applications

  • Tooling inserts with conformal cooling
  • Heat exchangers and manifolds
  • Turbine-style and structural components

Materials

  • Tool steel 1.2709
  • Stainless steel 316L / 17-4PH
  • Ti-6Al-4V
  • Inconel 718
  • AlSi10Mg

Frequently asked questions

What is the difference between DMLS and SLM?

Strictly, DMLS sinters alloy powders while SLM fully melts single-metal powders, but in practice both produce dense metal parts. We choose by material and result, not by acronym.

Related services

FDM 3D Printing

FDM (fused deposition modelling) extrudes heated thermoplastic through a nozzle layer by layer.

SLA 3D Printing

SLA (stereolithography) cures liquid photopolymer resin with a UV laser, layer by layer.

DLP 3D Printing

DLP (digital light processing) cures an entire resin layer at once with a projector.

SLS 3D Printing

SLS (selective laser sintering) fuses nylon powder with a laser.