Laser Cutting
Laser cutting melts or vaporises sheet metal along a programmed path with a focused beam, giving fast, accurate cuts with fine…
Services
Sheet metal fabrication turns flat metal sheet into finished parts by cutting, bending, stamping and joining. Snijer offers laser cutting, water jet cutting, bending and stamping for enclosures, brackets and structural parts.
Sheet metal is an efficient route to light, stiff parts: a flat pattern is cut from sheet, folded to shape and, where needed, welded, riveted or fitted with hardware. It scales smoothly from a single prototype enclosure to repeat series, with tooling cost kept low until volumes justify stamping dies.
We select the cutting method by material and edge requirement — laser for speed and fine detail in thin sheet, water jet for thick, reflective or heat-sensitive material — and then form, finish and inspect the part as one job.
Choose the process that fits your part.
Laser cutting melts or vaporises sheet metal along a programmed path with a focused beam, giving fast, accurate cuts with fine…
Water jet cutting uses a high-pressure stream of water, usually mixed with abrasive, to cut almost any material without heat.
Metal bending folds flat sheet along straight lines with a press brake to form angles, channels and boxes.
Metal stamping presses sheet or strip between a punch and a die to blank, pierce and form parts in seconds.
Sheet metal fabrication shapes flat metal sheet into parts by cutting it to a flat pattern, bending or forming it, and joining or finishing it. It is used for enclosures, brackets, frames and covers.
Laser cutting is fastest and most economical for thin and medium sheet with fine detail. Water jet is the choice for thick material, reflective metals, composites and anything that must not be heated.
CNC machining removes material from a solid block under computer control to make precise metal and plastic parts.
Vacuum casting makes small series of high-quality plastic or rubber-like parts in silicone moulds taken from a master model.
3D printing, or additive manufacturing, builds parts layer by layer directly from a 3D model.
Injection moulding melts plastic granules and injects them into a steel mould, producing identical plastic parts in seconds.