FDM 3D Printing
FDM (fused deposition modelling) extrudes heated thermoplastic through a nozzle layer by layer.
Part of 3D Printing
SLA (stereolithography) cures liquid photopolymer resin with a UV laser, layer by layer. It gives excellent surface quality and fine detail for visual models, master patterns and precise small parts.
Resin parts need support removal, washing and UV post-curing, after which they can be sanded, painted or coated. SLA masters are the usual starting point for vacuum casting. Resin properties range from rigid and clear to tough and flexible; they are generally less heat-resistant than nylon or engineering thermoplastics.
SLA traces each layer with a laser point; DLP exposes the whole layer at once with a projector. Both give fine detail; DLP is usually faster on small parts, SLA on larger ones.
FDM (fused deposition modelling) extrudes heated thermoplastic through a nozzle layer by layer.
DLP (digital light processing) cures an entire resin layer at once with a projector.
SLS (selective laser sintering) fuses nylon powder with a laser.
SLM (selective laser melting) fully melts metal powder with a laser to build dense metal parts.