SLA 3D Printing
SLA (stereolithography) cures liquid photopolymer resin with a UV laser, layer by layer.
Part of 3D Printing
FDM (fused deposition modelling) extrudes heated thermoplastic through a nozzle layer by layer. It is the most economical way to make functional prototypes, housings, brackets and jigs.
FDM — also called FFF — offers the widest choice of engineering thermoplastics at the lowest cost. Layer lines are visible and strength depends on build orientation, so we orient parts to put loads along the layers wherever possible.
For larger parts and higher deposition rates, pellet-fed FGF printing is available on request.
Yes, for many functional uses. Strength is lower across layers than along them, so we orient the part and choose the material for the load case; for the highest strength we suggest SLS or machined parts.
SLA (stereolithography) cures liquid photopolymer resin with a UV laser, layer by layer.
DLP (digital light processing) cures an entire resin layer at once with a projector.
SLS (selective laser sintering) fuses nylon powder with a laser.
SLM (selective laser melting) fully melts metal powder with a laser to build dense metal parts.