Skip to main content
SNIJER

Services

Vacuum Casting⁠

Vacuum casting makes small series of high-quality plastic or rubber-like parts in silicone moulds taken from a master model. It is the fast, low-cost route between a 3D-printed prototype and injection moulding.

About this service

A master model — usually 3D printed or machined and finished to a high surface quality — is cast into a silicone mould. Polyurethane resin is then poured into the mould under vacuum, which removes air bubbles and captures fine surface detail. Each mould typically yields about 20 copies.

The process reproduces textures and thin walls faithfully, can be coloured or overmoulded with soft materials, and imitates ABS, PP, PC, rubber and clear materials. It is ideal for pre-series, marketing samples, functional tests and low-volume products.

Key capabilities

  • Silicone moulds from a master model
  • Fine surface detail and textures
  • Colour matching and clear parts
  • Rubber-like and rigid polyurethane grades
  • Typically around 20 parts per mould

Typical applications

  • Pre-series and market-test samples
  • Housings and covers for functional testing
  • Low-volume end-use parts

Materials

  • PU resin imitating ABS
  • PU resin imitating PP / PE
  • Transparent PU (PMMA-like)
  • Rubber-like PU (Shore A 30 – 90)

Frequently asked questions

What is vacuum casting?

Vacuum casting is a process in which polyurethane resin is poured into a silicone mould under vacuum to make small series of plastic parts that closely match the look and feel of injection-moulded ones, without the cost of steel tooling.

How many parts does one silicone mould make?

Typically around 20, depending on part geometry and resin. For larger quantities, we move to injection moulding.

Related services

CNC Machining

CNC machining removes material from a solid block under computer control to make precise metal and plastic parts.

Sheet Metal Fabrication

Sheet metal fabrication turns flat metal sheet into finished parts by cutting, bending, stamping and joining.

3D Printing

3D printing, or additive manufacturing, builds parts layer by layer directly from a 3D model.

Injection Molding

Injection moulding melts plastic granules and injects them into a steel mould, producing identical plastic parts in seconds.