Skip to main content
SNIJER

Machining

3-axis vs 5-axis machining: when does it pay off?

5-axis machining costs more per hour but can cost less per part. Here is how to tell.

19 October 20264 min read

A 3-axis machine moves the tool in X, Y and Z. A 5-axis machine adds two rotations, so the tool or the part can tilt. The machine hour is dearer, but the part can be cheaper — or only possible — in the right cases.

Choose 5-axis when

  • The part has features on more than three faces, so 3-axis would need several set-ups.
  • There are undercuts or sculpted surfaces such as impeller blades.
  • Accuracy between faces matters: one set-up avoids the errors of re-clamping.
  • Deep pockets need short tools at an angle for rigidity and surface finish.

Stay with 3-axis when

  • The part is prismatic and machined from one or two sides.
  • Volumes are high and the part is simple: dedicated fixtures make 3-axis fastest.

See our 5-axis machining and CNC milling pages, or send a drawing and we will quote both.

Snijer EngineeringUpdated 2 November 2026

Related articles