Skip to main content
SNIJER

Sheet metal

Water jet vs laser cutting: which one for your part?

Both cut flat parts from sheet. Heat, thickness and material decide which is the better choice.

26 October 20264 min read

Laser and water jet cutting both turn a flat sheet into a part, but they work in opposite ways: one melts, the other erodes.

Laser cutting

A focused beam melts the material along the contour. It is the fastest and cheapest way to cut thin and medium steel, stainless steel and aluminium with fine detail. It leaves a small heat-affected zone.

Water jet cutting

A high-pressure jet of water carrying abrasive erodes the material. It does not heat the part, so there is no heat-affected zone, no hardening of the cut edge and no thermal distortion. It cuts thick plate, reflective metals, composites, stone, glass and ceramics.

A quick rule

  • Thin sheet, many holes, speed first: laser.
  • Thick material, non-metals, heat-sensitive alloys or a pristine edge: water jet.

Details: laser cutting and water jet cutting.

Snijer EngineeringUpdated 2 November 2026

Related articles